Uniden R7 Firmware 1.33

Uniden has just released firmware 1.33 for the Uniden R7.

Uniden R7 running firmware 1.33

This is a pretty big update with a lot of changes to K band, including improved BSM filtering, additional false alert filtering, MRCD improvements, and an improved menu structure. Auto-lockouts are still in development and are not included in this update, but they should be in the next update. Let’s run through all the new features and improvements that Uniden has been working on for the past months.

Download Uniden R7 fw 1.33 for Windows

Download Uniden R7 fw 1.33 for Mac

Firmware 1.33 Changelog

Here’s the changelog from their website before I go into detail:

1. Quiet Ride – Added MRCD On/Off – (Default Off)
2. Priority Alert – Ka/MRCD, MRCD/Ka, Strongest Signal – (Default MRCD/Ka)
3. VPR Laser Gun Detection – Added Stalker XLR, DragonEye (Full size & Compact)
4. BSM Filter Enhancement – K Band
5. MRCD False Reduction
6. Improved All Threat Display
7. Added Auto Mute rear K band – (Default -Rear K Mute Off)
8. Added “Heart Beat” to all standby displays
9. Normalized volume for each of the alert tones
10. Added Basic / Expert Menu Modes
11. K Narrow/ Wide/ Extended – There is another new option “Extended” that detects signals below 24.050 (23.900 – 24.250GHz). This new option is to detect the radar guns operating with signals below 24.050GHz.

Improved BSM Filter

First off, improved BSM filtering! The “K Filter” now does a better job of filtering out blind spot false alerts.

How effective is it? Well beta testers who ran 1.29 for a while and then switched to newer firmware have reported that the new BSM filter is more effective than it was with 1.29 and that the R7 is now quieter.

I’ve been running a variety of betas for a while so I don’t remember exactly how 1.29 performs anymore to say specifically how 1.33 is better. Instead I’ve been running the V1 Gen2 and Redline 360c more lately and I find that the R7 is still noticeably chattier than the other two. This update doesn’t bring it up to par with the competition unfortunately. However, it should be an improvement over 1.29 nonetheless, especially if you’ve been wanting a quieter R7. 🙂

Basic / Expert Modes

The R7 now has a basic mode and an expert mode.

Basic mode simplifies the menu and gives you access to just some of the key features. Expert mode allows you to unlock and customize every option available in the R7 such as additional filtering options, band segmentation, alert color customizations, custom alert tones, setting the time zone, etc.

(This option does not change when resetting the detector to factory default.)

Basic Mode Options

Here are the menu options available in Basic Mode:

• Highway / Advanced / City
• X / K / Ka percentages (in Advanced)
• Speed Camera On/Off
• Redlight Camera On/Off
• RLC Quiet Ride Speed
• Voice On/Off
• Ka Frequency Voice On/Off
• X Band On/Off
• K Band On/Off
• Ka Band On/Off
• Laser On/Off
• MRCD On/Off
• Display Mode
• Scan Icon On/Off
• Display Mode
• Alert Display Mode
• Speed Unit
• Auto Mute On/Off
• Auto Mute Volume
• Quiet Ride
• Quiet Ride Beep Volume
• Limit Speed
• Factory Reset
• Delete All Mute
• Delete All User
• SW Version
• DB Version

Expert Mode Options

Here are all the additional options that show up when switching to Expert Mode:

• Rear Balance
• GPS On/Off
• K POP On/Off
• Ka POP On/Off
• K Filter On/Off
• Ka Filter On/Off
• TSF On/Off
• K Block On/Off
• K Narrow / Wide / Extended
• Ka Narrow / Wide / Segmentation
• MRCD / Ka / Signal Priority
• Mute Memory X/K / Ka/MRCD
• All Threat On/Off
• Display Color
• Arrow Color
• Band Color
• X Band Tone
• K Band Tone
• MRCD Tone
• Ka Band Tone
• Bogey Tone
• Laser Tone
• Rear K Mute
• Dark Mode
• Auto Dim
• MRCD Quiet Ride On/Off
• Time Zone
• DST
• Battery Warning
• Battery Saver
• Self Test
• Memory Quota

Note: The MRCD options only show up when MRCD is enabled.

Extended K Band Scanning Range

We now have a new K band mode (K Extended) allowing us to scan down below 24.050 GHz when desired (again), down to 23.900. This is useful if you encounter certain guns (like some MRCD photo radar guns) that operate lower in K band.

• K Narrow: 24.080 – 24.200
• K Wide: 24.050 – 24.250
• K Extended: 23.900 – 24.250

MRCD Improvements

There have been a lot of improvements to MRCD as well.

Alert Priority

We now have more control over alert prioritization. Here’s how multiple signals are prioritized with the new modes:

• Ka/MRCD Priority:  Ka -> MRCD -> The strongest radar signal (X or K Band)
• MRCD/Ka Priority:  MRCD -> Ka -> The strongest radar signal (X or K Band)
• Signal Priority:  MRCD -> The strongest radar signal (X, K, Ka Band)

Reduced MRCD Falsing

MRCD falsing has been reduced. I do still see some MRCD falses myself though so they have not been eliminated.

MRCD Quiet Ride

We now have low speed muting available for MRCD, independent of low speed muting for traditional radar. To set this, you can use the new menu option called “Q-Ride MRCD.”

MR in All Threat Display

When a lower priority MultaRadar signal is shown in the All Threat display, instead of showing up as a “K” signal, it now displays “MR” in the side window.

All Threat Display Latch Time

Speaking of the All Threat Display, the latch time has been increased for signals that show up on the smaller left window so that the alerts stay on screen a little longer and don’t flash on and off so quickly. This helps to stabilize the display.

Mute Rear K Band

When the R7 is set to Expert Mode, there’s a new menu option called “Rear K Mute” which automatically mutes all K band signals behind you. This can be helpful to quiet down signals that are usually lower risk. Front and Side K band signals will all alert normally.

VPR Laser Gun Detection

Laser gun detection has been improved for variable pulse rate guns like the Stalker XLR, Dragon Eye SpeedLidar, and DragonEye Compact. This update helps the R7 recognize those pulse patterns and alert to those guns. It’s not a change to the detector’s sensitivity to laser.

Heart Beat Icon Change

The blinking “heart beat” icon is now available as a separate menu option called “Scan Icon” that can be turned on or off independent of the scanning bar animation in the “Scan Display” menu option.

Normalized Volume for Alert Tones

To keep the volume levels similar for the different alert tones, they have all now been normalized.

Quiet Ride One Beep Volume Control

There is a new menu option called “Q-Ride Beep Vol” that lets you set the volume of the initial quiet ride (low speed muting) beeps. You can disable the beeps altogether now (set it to Volume 0) or adjust the initial beep volume to be anything between Volume 1-8.

RLC Quiet Ride Display

When a redlight camera alert is being muted by low speed muting, you’ll now see the green “Q-Ride” text displayed on screen.

Menu Scrolling Change

Finally, if you long press the Volume – or + buttons on top of the detector, it’ll let you cycle through the menu options. This is slower than quickly pressing – or + buttons to get to where you want, but it is a small new option here in this latest firmware.

Where to Download 1.33

You can download firmware 1.33 off Uniden’s website here.

Note: The update on their website is just for Windows, but you can use the Mac software included with previous firmware versions to update to 1.33 on Mac. (Uniden, please start including a link for Mac software too with every update you release.) To make things easier, I’ve gone ahead and packaged up everything you need here:

Download Uniden R7 fw 1.33 for Windows

Download Uniden R7 fw 1.33 for Mac

If you need help updating your R7, you can watch this firmware update tutorial video.

To program your R7, check out my updated R7 settings guide.

Finally, if you don’t have an R7 yet, you can purchase your Uniden R7 here.