How to Set Up & Configure Your Beltronics Magnum

  • By

  • August 6, 2015

  • August 6, 2015

  • 1 mins to read

The Beltronics Magnum offers a number of different settings and options that help you customize the detector to maximize your performance and minimize your false alerts. This video will walk you through the different menu options and explain what the different settings mean.

Beltronics Magnum Recommended Settings:

Here are the general recommended programming settings for the Beltronics Magnum. You may want to customize this further depending on your personal needs and where you drive, but it’s a good starting point.

Highway Mode
X Off
K On
KaSW Off
Ka 2,5,8 On
RDR Off
TSR On
SWS Off
POP Off
Laser On

How to Program the Beltronics Magnum: Best Settings

This website contains affiliate links and I sometimes make commissions on purchases. All opinions are my own. I don’t do paid or sponsored reviews.

Click here to read my affiliate disclosure.

Vortex

Permanent link to this article: https://www.vortexradar.com/2015/08/how-to-set-up-configure-your-beltronics-magnum/

3 comments

  1. Are Radar frequencies the same in Canada as the US? Would you recommend different settings here. I have an STi Magnum but it doesn’t seem to detect Raptor Radar……K or Ka. RCMP use it almost exclusively here (I assume the US as well). I do not have the above settings. Only difference is I had KaSW on and RDR on.

    1. They’re the same, yeah. The Magnum can detect the Raptor RP-1, both K and Ka. It has a normal Ka antenna on 35.5 and a lower output power level on K band.

  2. So the specific band settings you suggest should help with better detection?

Leave a ReplyCancel reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Exit mobile version